HAND
LE
SCREW
HAND
LE
COVER CAPS
THERMOSTATIC
CARTRIDGE
Replacement part
US-WLBGEXPVLVCAR
LOCKING
NUT
STOP
RING
CERAMIC
RING
VALVE
COVER
HAND
LE
HAND
LE
COVER CAP
SCREW
NOTE:
To avoid damage, please remove all
finished
parts
before maintenance takes place.
Thermostatic cartridges
l
The 1”
concealed
thermostatic valve should give trouble
-
free
service,
however
servicing is a straightforward process.
To remove the thermostatic cartridge
l
Gently unscrew the cover cap from the hand
le
.
l
Undo the long screw and dissasemble the parts as shown.
l
Undo the cartridge locking nut, (take note of the orientation of the
cartridge).
l
Pull the cartridge out of the mixer housing.
l
Wash the cartridge with clean running water and make sure that
any trapped debris has been removed.
l
Dry and lightly grease the seals, (only use silicone grease), and
replace the cartridge.
l
Re-assemble all parts.
3
Maintenance
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This will
maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup. Follow instructions to
ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners, cleansers or disinfectants will
alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and glass cleaners to
remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes. ollow instructions to ensure optimum results.