Installation Instructions
6
-
1/2"
2
-5/8"
9
-3/
4
"
4
-7/8"
dia.
35"
3
9
-1/2"
Adjustable
wrench
Channel
locks
Plumbers’ putty
or caulking
Flat head
screwdriver
Cross head
screwdriver
Hexagonal
key
MPRO Floor-mount Thermostatic Tub Filler
US-PRO418
Introduction
Installation notes
The faucets in this range are single flow (hot and cold water mix in the
body) and should therefore be supplied with hot and cold water at
balanced pressures. If the faucets are not supplied at balanced
pressures then the mixer will not function correctly.
The minimum water pressure required for these faucets is
20
psi.
The maximum water pressure is
60
psi, (beyond which pressure
-
reducing valves must be
installed
).
The faucets are fitted with quarter
-
turn ceramic disc cartridges which
provide a good flow rate with very smooth movement.
IMPORTANT:
Before beginning installation, check for any damage
that may have occurred during transport.
Note: Damage claims cannot be made during or after installation.
IMPORTANT: Please read these instructions carefully before you
begin and retain for future reference. These instructions have
been prepared for your guidance, you must exercise due care at
all times.
We do not accept responsibility for any problems that may occur
through incorrect installation.
Dimensions
Tools required
The installation must comply with all plumbing codes including local
codes and be installed by a licensed plumbing contractor.
Install US-418ROUGH first using the instructions provided with it.
IMPORTANT
!
Before installing a new faucet it is essential that
the
supply pipes are thoroughly flushed
in order to remove any
remaining
debris
, solder or other impurities. Failure to carry out this
simple procedure can cause problems or damage to the working of
the faucet.
Installing shut-off valves on incoming supply lines is recommended
for ease of maintenance.
T
urn off the main water supply before connecting to any existing
pipework or doing any maintenance.
WARNING! Please check for any hidden pipes and cables, electric
or otherwise
,
before drilling holes in a wall
or floor
.
