14-03-T-PC
14-03-T-SN
14-03-T-PN
14-03-T-BZ
Installation Instructions
15121442-A
2
15121442-A
3
Replacement Parts
NO. Description
Part NO.
1
Diverter Knob & Rod Assembly
9Q1108
2
3
Deck Spout Set Screw & Allen Key
9Q1350NT
4
Cross
Handle Assembly
14-XHDL
5
Washer, Key & Aerator
9Q1110PL
6
Washer
51011909PL
7
Hand Shower Set Screw & Allen Key
9Q1349NT
Hand Shower
5F0M0178
1
2
3
4
5
Turn the water supply off and remove
the mud guards.
Pull black nylon or finished hose
through the hand shower nipple
bracket. Slide the hand shower “O”
ring, bracket and hose guide over the
hose. Secure the assembly with the
setscrew. Note, make sure the hose
does not slip under the deck.
6
Place the spout washer under the
spout and install spout on spout
nipple-diverter assembly. Be sure the
spout is firmly resting on the deck.
Secure the spout with the setscrew.
Insert diverter knob and rod assembly
into the spout and thread the
assembly onto the diverter rod in the
spout diverter assembly. Pull the
diverter rod and knob up and down to
test the connection.
Place the “O” ring over the cold valve.
Align the handle and place the handle
and escutcheon assembly into the
valve. Secure the assembly by turning
the escutcheon clockwise. Repeat for
hot valve.
Remove the aerator with the supplied
key. Turn the water supply on.
1
3
4
5
7
6
2
7
Make sure the diverter knob is in the
down position. Turn the faucet
handles on full for one minute to flush
debris.
8
Leaving the water on, pull the hose
to its farthest extension and point it
into the tub. Pull the diverter knob to
its top position. Flush the debris fro
one minute. Turn off the valves.
9
Attach the hand shower to the black
nylon or finished hose.
10
Re-install the aerator with key.
11
Installation complete.