Installation Instructions
2
Tools You Will Need
For eas
e of
installation you will need:
● To read the installation
instructions
completely before
beginning.
● To read all warnings, care, and maintenance information.
Flat Head Screwdriver
Pencil
Drill
Philips Screwdriver
Level
14-58-PC
14-58-SN
14-58-PN
14-58-BZ
1
Determine the handing of the accessory. If you would like to flip the bar, please
follow steps 2 – 3.
Slide the bar into the post and secure
it to the post using the philips head
screw.
Determine the location of the
accessory.
Mark drill holes in desired location.
Drive the wall anchors into the drilled
holes with a Phillips screwdriver.
Place the mounting bracket over the
wall anchors. Secure it to the wall using
the supplied screws.
Inside the post, remove the philips head
screw with a screw driver and slide out
the bar
.
Drill 1/4" holes in marked locations.
Temporarily place the accessory on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
Place accessory on the mounting
bracket. Secure it to the wall using
the bottom set screw.
bracket.
Leyden
Paper Holder
/
Towel Ring
14-5
8
Installation Instructions
Before beginning installation, check for any
damage that may have occurred during transport.
Note: Damage claims cannot be made during
or after installation.