2
INSTALLATION INSTRUCTIONS
Basin & Basin Unit Installation
Step 1
Step 3
Step 2
Removing the drawer
Pull the drawer out, lift slightly
aprox. 10 cm before the limit stop.
‘Wall bracket’ installation
Use the measurements above, to position the ‘wall brackets’.
a: Important:
The measurements given
above are the maximum the brackets can
be spaced apart, the brackets must fi t
within that measurement.
b:
Mark the bracket fi xing holes onto
the wall. Drill Ø 8mm holes, insert the
wall plugs on solid walls and attach the
brackets
Important:
If the basin unit and/or basin are not fi tted level
this may result in the basin not draining correctly.
Position the unit on the brackets.
Plan unit position
Decide on the position and height of the unit. The
recommended basin height is between 860 and 870mm from
fl oor to top of basin.
Pull fi rmly horizontally until
the drawer audibly disengages,
then lift off .
Removing bracket from the wall
a
Glide II Furniture 04/2022
b / Base Unit 500/600/700/1000
b / Base Unit 200
weight capacity per set
of brackets is 172Kg
weight capacity per set
of brackets is 154Kg