Installation Instructions
2
Series # 11
Robe Hook
Tools You Will Need
11-51-PC
11-51-SN
11-51-PN
11-51-BZ
Installation Instructions
For easy installation of your robe hook you will need:
●
To read all the installation completely before beginning.
●
To read all warnings, care, and maintenance information.
Flat Head Screwdriver
Pencil
Drill
Philips Screwdriver
Level
11-51
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location
Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.