Warranty
-
This
Crosswater London
product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact
:
Crosswater London
, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: 508-381-0433 fax: 508-381-6068
www.crosswater
london.
com
email: technical@crosswater
london
.com
Issue date:
20112019
SHOWER
HEAD
WASHER
FILTER
SHOWER ARM
SHOWER
HEAD
WASHER
FILTER
ATTENTION
:
Check all new connections for leaks.
Turn on the main water supply, close all faucets except for the new
installed shower head and as the system refills, check for leaks.
Installation
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This
will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product. Simichrome
Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup. Follow instructions to ensure
optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners, cleansers or disinfectants will
alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and glass cleaners to
remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Cleaning Instructions
Parts list
Shut off the water heating system. Then, with the main water supply
turned off, open the lowest hot and cold faucets and allo
w
to drain
until supply pipes are empty.
Insert the washer and the filter into the shower head, then connect it to
the shower arm as shown opposite.
