Crossmatch D SCAN AUTHENTICATOR CF, Руководство пользователя

Страница: 54 / 72

4-2 D S C A N
®
A U T H E N T I C A T O R C F ™ U s e r M a n u a l v 2 . 1
M a i n t e n a n c e
4
Make sure that the document contact area is dry before starting the reading
process.
Clean the case
Warning
Before you clean the case, disconnect the D SCAN AUTHENTICATOR CF from the
grounded outlet.
To remove smudges, laminate glue, finger prints or other dirt, and grime:
1 Take a soft, lint free cloth and put a small amount of glass cleaner on it.
2
Wipe the case in a direction AWAY from the document contact area.
Caution
Do not use acetone, oil-based, abrasive or other unauthorized cleaners. This may damage
the device and render it inoperable. Using unapproved cleaning solutions will void the
warranty.
Authenticator CF specifications
Table 4.2
Product specifications
Item Specification
Resolution
Native 475 ppi sensor for best recognition of high
density features
Dynamic range
Visible light and UV light 24 bit RGB color, IR light:
8 bit gray scale
Illumination
Visible light: wavelength 430-680 nm
IR light: wavelength 895 nm
UV light: wavelength 365 nm
Coaxial light (not available in all markets)
Document support field size
5.9 in x 7.4 in (151 mm x 189 mm), document
thickness is not limited
Optical scan format
Active size 5.3 in x 3.9 in (135 mm x 100 mm)
Optical scanning time
approx. 2 seconds for all images combined
Image format
2528 x 1888 pixels
Supported documents
Compliant with ICAO 9303 documents of ID1, ID2,
and ID3 format, other ID-1, ID-2 and ID-3
documents on request
Document thickness
Not limited
RFID operating frequency
13,56 MHz
RFID magnetic field
strength
Max. 4,0 A/m
Transmission power
Max 200 mW
RFID tag access
According to ISO 14443 Type-A and Type-B plus
applicable ICAO recommendations in ICAO Doc
9303 including supplement, LDS 1.7,PKI 1.1