Crosslee PLC HL6200, Инструкция по эксплуатации

Страница: 5 / 8

DOOR ADJUSTMENT
Every effort is made in the manufacturing process to
ensure the doors are correctly aligned before
dispatch.
All models except HL 6200 and HL 6232 are fitted
with adjustable hinges to allow realignment of the
doors if necessary (e.g. when the trolley is being used
on uneven floors).
The hinges used are of a common construction to
those found on kitchen, bedroom and dining room
furniture.
Refer to figures 1 and 2.
To adjust the door in the lateral (X) direction:
•Slacken screws “A” half a turn.
•Adjust the lateral movement of the door by adjusting
screw “B”.
Turning screw “B” clockwise forces the hinge away
from the side of the trolley and vice versa.
•Remember to retighten screw “A” after the
adjustment is complete.
To adjust the door in the frontal (Y) direction:
•Slacken screws “A” half a turn.
•Adjust the door to the desired position by pushing
the hinge towards the back of the trolley or pulling
the hinge towards the front of the trolley.
•Remember to retighten screw “A” after the
adjustment is complete.
To adjust the door in the vertical (Z) position:
•Slacken screw “C” on both hinges half a turn.
•Adjust the door to the desired position by lifting the
door up or pushing it down.
•Remember to retighten the screws after the
adjustment is complete.