CFQ5.2 front panel
1.
Input select button
: selects from input 1 to input 2
2.
Peak indicator
: this will illuminate when the inputs or outputs are overloaded
3.
Power on/off indicator
: this illuminates when system is turned on
4.
Master volume control
: used to control the system volume when the source unit is preset to a specific
volume.
5.
Fader
: adjusts the proportionate level of the front and rear outputs
6.
Subwoofer level control
: adjusts the subwoofer output level below the crossover frequency selected.
7.
50 Hz
: this adjusts the boost or cut of up to 12 dB at 50Hz.
8.
250 Hz
: this adjusts the boost or cut of up to 12 dB at 250Hz.
9.
1 KHz
: this adjusts the boost or cut of up to 12 dB at 1KHz.
10.
2.5 KHz
: this adjusts the boost or cut of up to 12 dB at 2.5KHz.
11.
6.5 KHz
: this adjusts the boost or cut of up to 12 dB starting at 6.5KHz and peaking at 22KHz
CFQ5.2 rear panel
1.
Subwoofer output
: accepts male RCA connectors leading to the subwoofer amplifier
2.
Rear output
: accepts male RCA connectors leading to the rear speaker amplifier
3.
Front output
: accepts male RCA connectors leading to the front speaker amplifier
4.
Input 2
: pigtails accept male RCA connectors from an auxiliary source
5.
Input 1
: pigtails accept male RCA connectors from primary source
6.
Input 2 level control
: use flathead screw driver to adjust the input level to match that of the primary
unit’s (source) input.
7.
Input 1 level control
: use a flathead screwdriver to adjust the input level to the source unit’s output .
8.
4 pin modular socket
: contains the power, ground and remote turn-on input and delayed remote
output.
