1.2 Technical Characteristics
TABLE 1.0 4116-T21-310212
Multi-Band Block Translator
Specifications**
Input Characteristics
Impedance/Return Loss
50
Ω
/14 dB, min
Frequency (GHz)
SEE BAND CHART
Noise Figure, Max.
30 dB at max gain
Input Level range
-40 to -20 dBm
Output Characteristics
Impedance/Return Loss
50
Ω
/10 dB, 14 dB typ
Frequency (GHz)
SEE BAND CHART
Output Level Range
-20 to 0 dBm
Output 1 dB comp., max. gain
+10 dBm, at max gain
Output 1mute., max. gain
>50 dBc, at max gain
BAND
IN RANGE
OUT RANGE
LO
Fixed Spurs (25 dBC at -20 in)
NO.
(GHz)
(GHz)
(GHz) ( 5 dBC at -40 in)
1
29.0-30.0
19.2-20.2
9.80 19.6
2
30.0-31.0
20.2-21.2
9.80 19.6
Band Chart - Frequencies, LOs, LO Harmonically-related Fixed Spurs
Channel Characteristics
Gain at Fc
+23 ± 3 dB max., (+20 to 0 dB variable in 1±1 dB steps).
Input to Output Isolation
> 45 dBC, min; > 60 dBC typ. (at max gain and 0 dBm out).
Spurious, Inband
> 30 dBC in band, except 25 dBC (> 30 dBC typ.) at
-20 dBm in for harmonics of LOs that fall close to or in-band
(See Chart).
Spurious, Out of band
<-50 dBm, signal independent; fc ± 1 GHz, except for
harmonics of LOs (See Chart) in this band
Spurious, LO
<-50 dBm, measured at the input; <-40 dBm,
measured at the output.
Intermod 2 Tone
> 45 dBC (> 50 dBC typ.), for two carriers at 4 MHz spacing,
each at -5 dBm out, at max gain
Frequency Response
±2.0 dB, over RF band; ± 0.5 dB, 40 MHz BW
Frequency Sense
Non-inverting
LO Characteristics
LO Frequency
Band Specific
Frequency Accuracy
± 0.05 ppm max. over temp internal reference; ext. ref. input
10 MHz Level
+2 to +8 dBm in; Monitor Output= Input Level ±1.0 dB, 50
Ω
Phase Noise @ F (Hz) >
100
1K
10K
100K
1M
Specification dBC/Hz
65
75
85
95
110
4116-T21-310212 Manual, Rev. 0
Page 4
03/13/18