manualshive.com logo in svg

Cross Technologies 2582-122, Инструкция по эксплуатации

Поделиться
Скачать
Cross Technologies 2582-122 Скачать руководство пользователя страница 15

2.5.5  Minimum Auto Switching Mode

Enabling and Disabling

The  Minimum  Auto  Switching  mode  is  enabled  and  disabled  via  a  front  panel  menu.    The  Minimum  Auto 
Switching mode can also be enabled and disabled via the following M&C command:

{C5x}
Where x=1 to enable and x=0 to disable.

The status of the 2582-122’s Minimum Auto Switching mode setting can be queried by sending the following 
command:

{S5}

Which returns {S5x} where x=1 if enabled and x=0 if disabled.

Operation

In the Minimum Auto Switching mode the switch will remain in a backup state after an alarm event - even if 

the alarm event that caused the unit to switch has been cleared.  The main display will show an “H” under the 
BU MODE after an alarm causes the switch to change states while in the Minimum Auto Switching mode.  The 
unit can be restored to the normal state via a front panel restore command or an M&C restore command.  The 

front panel restore switch menu appears after the Minimum Auto Switching mode ON/OFF menu only if the 
Minimum Auto Switching mode is on.  The switch can also be Restored via the following M&C command:

{C6x}

Where x=1 to Restore.

NOTE

:  The switch will automatically restore - as soon as the alarm event that caused the unit to switch has 

been cleared - 

IF

 the Minimum Auto Switching  mode is disabled either via the front panel setting or  by the 

M&C command.

2582-122 Manual, Rev. B

 

 

 Page 15

         1/24/22

Содержание 2582-122

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды