2.5 Power On Settings
Figure 2.5 shows the various Front Panel LCD Displays that you will see during the Power Up sequence and
the Settings modes. The first two displays (Power Up, displaying Model Number, Rev. Level and IP Address
are only displayed briefly during the Power On sequence.
The Normal Display is what you will see while the unit is in normal operating mode.
When power is first applied, the LCD display goes through three steps.
1. The model number and options will be displayed.
2. The unit reads the IP address (if Ethernet option installed) and displays IP Address.
3. The current frequency setting of each channel downconverter is displayed.
The unit is now operational and ready for any changes the operator may desire.
The Menu Displays are those displays you will see when making any Setting changes.
NOTE: Mode Settings and Values will be changed as you select them, but they will NOT BE SAVED if you
do not select Save and YES. If you do not wish to save any settings you can either select Save and NO or you
can NOT press the Menu/Execute switch and simply do nothing for approximately 30 seconds and the unit will
return to the previously saved Mode and Value Settings.
The “R” shown on the menu is a Return setting that allows you to Stop and Save wherever you are in the
Settings mode, without going through all the Menu screens.
2.5.1 Control Switches
1. Menu/Execute - Any change to the programming of the unit must be initiated by pressing the
Menu/Execute switch and completed by pressing the Menu/Execute switch (Figure 2.3).
2. Horizontal Switch - This switch is mounted so its movement is horizontal and moves the cursor
left or right (Figure 2.3).
3. Vertical Switch - This switch is mounted so its movement is vertical and has two functions:
a. During frequency, gain changes, the vertical movement will raise or lower the number in
the direction of the arrows (Figure 2.3).
b. For other functions such Mute on/off, the vertical switch will alternately turn the function
on or off regardless of the direction operated.
2416-402 Manual, Rev. B
Page 15
05/14/14
