Cross Technologies 2117-7172, Инструкция по эксплуатации, Страница: 7 / 10

TABLE 2.1 JJ11 TABLE 2.1 J11 Pinouts (DB9)
Pin Function
1 Not Used
2 Not Used
3 Not Used
4 Not Used
5 GND
6 Alarm Relay: Common
7 Alarm Relay: Normally Open
8 Not Used
9 Alarm Relay: Normally Closed
TABLE 2.3 D DC1 TABLE 2.3 DC1 Pinouts
Pin# Function
1 Minus DC input
2 NC
3 Plus DC input
4 NC
Shell Ground
FIGURE 2.1 2117-7172 Rear Panel I/O
ʼ
s FIGURE 2.3 2117-7172 DC1 Pinouts
TABLE 2.2 Available Options
P48 = 48 V DC Power Supply
R = Redundant AC Power Supply
Available Connector Options
NF 50 Ω N-Type (RF), 75 Ω F-Type (L-Band)
N 50 Ω N-Type (RF), 75 Ω BNC (L-Band)
NN 50 Ω N-Type (RF), 50 Ω N-Type (L-Band)
SS 50 Ω SMA (RF), 50 Ω SMA (L-Band)
FIGURE 2.2 2117-7172 Available Options
AC Fuse - 2 amp slow blow (Type T),
5 mm X 20 mm
FUSE DRAWER
SPARE FUSE
~
INPUT
100-240± 10%VAC
47-63 Hz
2A MAX
FUSE
TYPE T 2A GDC
250 VOLT
FOR 100 - 240 V~
~
FIGURE 2.3 Fuse Location and Spare Fuse
2117-7172 Manual Page 7 11/14/19