Cross Technologies 2116-84T78, Инструкция по эксплуатации

Страница: 6 / 9

2.2 Rear Panel Input/Output Signals
Figure 2.1 shows the input and output connectors on the rear panel.
1 5 2 3 4
6 7 8 9
AC
GND
J8 J2
EXT 10MHZ
IINPUT
RF INPUT
10MHZ REF
OUTPUT
INT EXT
AUTO
S1
J101
J11
ALARM
J102 - RF OUTPUT
SMA (female) 7.25 to 7.75 GHz,
-30 dBm max output signal. See Table 2.2
for other table connector options
AC INPUT
100-240 ±10% VAC,
47-60 HZ
Uses 2 amp Slow Blo,
5mm fuse S1 - 10MHZ SWITCH
3-position switch. INT selects internal 10MHz ref.
AUTO selects internal 10MHz ref, unless a
+3dBm ±3dB 10MHz signal is inserted on J2.
EXT selects external 10MHz ref from J2.
J2 - EXT 10MHZ INPUT
BNC (female) 50
Ω /75 Ω . Insert external
10MHz reference here (3 dBm ± 3 dB).
J101 - RF INPUT
SMA (female) 50
Ω
7.9.0 to 8.40 GHz,
-10 dBm max input signal.
See Table 2.2
for other table connector
options .
J11 - ALARM
DB9 (female) connector.
See Table 2.1.
J8 - 10MHZ REF OUTPUT
BNC (female) 50
Ω /75 Ω .
Outputs the currently selected
10MHz ref signal (3 dBm ±3 dB).
RF OUT
FIGURE 2.1 2116-84T78 Rear Panel I/O
ʼ
s
TABLE 2.1 J1 11 TABLE 2.1 J11 Pinouts (DB9)
Pin Function
1 Not Used
2 Not Used
3 Not Used
4 Not Used
5 GND
6 Alarm Relay: Common
7 Alarm Relay: Normally Open
8 Not Used
9 Alarm Relay: Normally Closed
TABLE 2.2 C Connector 2.2 Connector
Option RF Input RF Output
STD SMA, 50 Ω SMA, 50 Ω
NN N-Type, 50 Ω N-Type, 50 Ω
2.3 Front Panel Indicators
Figure 2.2 shows the front panel indicators.
DS2 - ALARM LED
Lights RED when PLL comes
out of lock.
DS1 - POWER LED A
Lights GREEN when DC voltage is
present from AC power supply.
DS3 - EXT 10MHZ LED
Lights YELLOW when external
10MHz reference is active.
POWER
EXT
10MHZ ALARM
FIGURE 2.2 2116-84T78 Front Panel Controls and Indicators
2116-84T78 Manual, Rev. 0 Page 6 12/09/19