Cross Technologies 2116-116, Инструкция по эксплуатации

Страница: 6 / 9

2.2 Rear Panel Input/Output Signals
Figure 2.1 shows the input and output connectors on the rear panel.
1 5 2 3 4
6 7 8 9
AC
GND
J8
J2
EXT 10MHZ
RF INPUT
INPUT
10MHZ REF
OUTPUT
INT EXT
AUTO
S1 J1
L-BAND
OUTPUT
J101
J11
ALARM
AC INPUT
100-240 ±10%VAC, 47-63 HZ
Uses 2 amp Slow Blo,
5mm fuse S1 - 10MHZ SWITCH
3-position switch. INT selects internal 10MHz ref.
AUTO selects internal 10MHz ref, unless a 3dBm
±3dB 10MHz signal is inserted on J2.
EXT selects external 10MHz ref from J2. J101 - RF INPUT
SMA (female) 50
11.7 to 12.2 GHz
-35 dBm max input signal
See Table 2.2 for other
connector options.
J8 - 10MHZ REF OUTPUT
BNC (female) 75
. Outputs currently
selected 10MHz ref signal (3 dBm ±3 dB).
J1 - L-BAND OUTPUT
BNC (female) 50
. 0.95 to 2.00 GHz,
0 dBm max input signal. See Table 2.2
for other connector options.
J2 - EXT 10MHZ INPUT
BNC (female) 75
. Insert external
10MHz reference here (3 dBm ± 3 dB).
J11 - ALARM
DB9 (female) connector.
See Table 2.1.
FIGURE 2.1 2116-116 Rear Panel I/O s
TABLE 2.1 JJ11 TABLE 2.1 J11 Pinouts (DB9)
Pin Function
1 Not Used
2 Not Used
3 Not Used
4 Not Used
5 GND
6 Alarm Relay: Common
7 Alarm Relay: Normally Open
8 Not Used
9 Alarm Relay: Normally Closed
TABLE 2.2 Connector Optionns Option s
Option RF L-Band
STD SMA, 50 BNC, 50
M Type N, 50 BNC, 50
N Type N, 50 BNC, 75
NF Type N, 50 Type F, 75
NN Type N, 50 Type N, 50
S7 SMA, 50 BNC, 75
SF SMA, 50 Type F, 75
SN SMA, 50 Type N, 50
SS SMA, 50 SMA, 50
2.3 Front Panel Indicators
Figure 2.2 shows the front panel indicators.
DS2 - ALARM LED
Lights RED when PLL
comes out of lock.
DS1 - POWER LED A
Lights GREEN when DC voltage is
present from AC power supply.
DS3 - EXT 10MHZ LED
Lights YELLOW when external
10MHz reference is active.
POWER
EXT
10MHZ ALARM
FIGURE 2.2 2116-116 Front Panel Controls and Indicators
2116-116 Manual Page 6 06/231/10