CROSS TECHNOLOGIES, INC.
SIGNAL
IN
DC
SIGNAL
OUT
J3 - DC Power - The +15 VDC
unregulated DC Voltage from the wall
power supply
J1 - 70 MHz IN
The 50 MHz IF
input. This is at a
0 to -80 dBm level.
This is a 50
,
BNC, female
connector.
GND
+15
J2 - IF Output - The 50
MHz output.
This is a 50
, BNC output at -35 ±10 dB level.
The gain is automatically adjusted in AGC mode,
and by R40 in MGC.
Figure 2.3 2097 Rear Panel Inputs and Outputs
2097-08 Manual, Rev. 0
Page 5
04/26/10
