2.5.5 Gain Changes
When you get to this menu note that the gain changes will be made as you make them but if you do not wish to
save the changes you have made, scroll to
“R”
and push the menu/Execute switch and select
“NO”
in the
“SAVE SETTINGS?”
window or
do not press the Menu/Execute switch
; simply do nothing for
approximately 12 seconds, and the system will return to the normal operating mode.
NOTE: CHANGES TAKE PLACE ON LEVEL AND GAIN IMMEDIATELY BUT DO NOT GET
SAVED UNTIL YOU GO TO THE SAVE MENU AND INDICATE YOU WANT TO SAVE THE
CHANGES.
Press the Up/Down switch to change the level in 1 dB steps and then push the Menu/Execute switch to
get to the Gain setting:
G A I N = + 2 0 R
Pressing the Up/Down switch to change the gain in 1 or 10 dB steps and then push the Menu/Execute
switch to get to the Gain setting:
G A I N = + 2 0 R
By using the horizontal rocker switch the cursor can be moved left or right .
Pressing the Up/Down switch down will toggle the display digit selected until you have the desired gain.
NOTE: THE GAIN WILL BE CHANGED AS YOU ADJUST THE NUMBERS. HOWEVER, THE
VALUE WILL NOT BE STORED UNTIL YOU INDICATE YES IN THE SAVE SETTINGS
WINDOW.
When the display indicates the value desired you can push the
Menu/Execute switch to the next item OR you can scroll to “R”,
push the Menu/Execute switch to get to:
S A V E S E T T I N G S ? Y N
Selecting
Y
will save the new settings.
Selecting
N
will revert to the previous settings.
Pushing the Menu/Execute switch then takes you to the :
719 to 201
G = +10 REF=INT
Figure 2.4 gives the menu items and how to make changes
2016-75-213, Rev. A Manual
Page 15
4/16/09
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
