Cross Technologies 1599-10, Инструкция по эксплуатации

Страница: 5 / 17

2.1 Mechanical - The 1599-10 goes in any slot of a 1601, 1651 or 1602 mainframe. It derives ±15 V from the
mainframe. Figure 2.1 shows the 1599-10 in slot 1.
1599-10 Noise Source ( fits in any slot in a 1601 or 1651 mainframe; slot 1 shown.
1599-10 Noise Source ( fits in any slot of a 1602 mainframe; slot 1 shown)
FIGURE 2.1 1599-10 MAINFRAME INTERFACE
POWER SUPPLY
1 2 P. S.
J10 J9 J7 J6 J4
J5 J1 J3
POWER SUPPLY
1 2 3 4 5 6 7 8 9 P. S.
70 MHz SIGNAL IN
1602 FRONT
1601 REAR
1601 FRONT
J10
2
J30
J40
J45
J42 J41
J43
12
24 13
12 1
NOISE OUT
J20
-10dB MONITOR
NOISE OUT
1602 REAR
70 MHz SIGNAL IN
-10dB MONITOR
2.2 Controls and Indicators - Figure 2.2 shows front panel controls and indicators.
2.3 Input / Output Signals - Figure 2.3 shows the input and output signals to the 1599-10.
Figure 2.5 is a sketch of the 1601 position 1 and 2 interconnections for reference.
2.4 Jumper Settings - Figure 2.4 shows jumpers and other on-card controls.
1599-10 Manual, Rev. A Page 5 01/07/10