Cross Technologies 1584-116S, Инструкция по эксплуатации

Страница: 6 / 9

2.2 Rear Panel Input/Output Connectors
The input and output connectors on the rear panel are shown in Figure 2.1.
AC INPUT
100-240
±
10% VAC,
47-63 HZ Uses 2 amp
Slow Blo, 5mm fuse
J17 - SPLITTER INPUT
Type F (female) 75
Ω .
See Table 2.0 for other
connector options.
J16,J15,J14,J13,J12,J11,J10,J9 - SPLITTER OUTPUTS
Type F (female) 75
Ω . Terminate when not used. See
Table 2.0 for other connector options.
AC
GND
JI
J2 J3 J4 J5 J6 J7 J8 J9
J10 J11 J12 J17 J13 J14 J15 J16
IN
SPLITTER
J8,J7,J6,J5,J4,J3,J2,J1 - SPLITTER OUTPUTS
Type F (female) 75
Ω . Terminate when not used.
See Table 2.0 for other connector options.
J16, J17 OUTPUTS
10MHz pass through (option W9)
FIGURE 2.1 1584-116S REAR PANEL
TABLE 2.0 RRF 2.0 RF Connector Options
Option RF Connectors
STD Type F, 75 Ω
-B BNC, 75 Ω
-D BNC, 50 Ω
-W9 10MHz pass thru -J17 to J16
2.3 Front Panel Monitors and Indicators
Figure 2.2 shows the front panel monitors and indicators.
DS5 - POWER LED
Lights green when DC voltage is
present from AC power supply.
POWER
MODEL 1584
SPLITTER
C
ROSS
T
ECHNOLOGIES INC.
FIGURE 2.2 1584-116S FRONT PANEL
1584-116S Manual, Rev.C Page 6 12/06/10