2.5.3 Control Switches
1. Menu/Execute - Any change to the programming of the unit must be initiated by pressing
the Menu/Execute switch and completed by pressing the Menu/Execute switch.
2. Horizontal Switch - This switch is mounted so its movement is horizontal and moves the cursor
left or right.
3. Vertical Switch - This switch is mounted so its movement is vertical and has two functions:
a. During gain changes, the vertical movement will raise or lower the number in the direction
of the arrows.
b. For other functions such as Remote Mode, the vertical switch will cycle through the different options.
2.5.4 Gain Changes
When you get to this menu note that the gain changes will be made as you make them, and they will be saved
immediately. Press the Menu/Execute button until you get to the desired gain setting:
GAIN 1=-10
LEVEL1=<+5
R
Pressing the Up/Down switch to change the gain in 1 or 10 dB steps and then push the
Menu/Execute switch to get to the Gain setting:
GAIN 1=-20
LEVEL1=<+5
R
By using the horizontal rocker switch the cursor can be moved left or right .
GAIN 1=-20
LEVEL1=<+5
R
Pressing the Up/Down switch down will toggle the display digit selected until you have the desired gain.
NOTE: THE GAIN WILL BE CHANGED AND SAVED AS YOU ADJUST THE NUMBERS.
When the display indicates the value desired you can push the Menu/Execute switch to the next item OR
you can scroll to “R”, push the Menu/Execute switch to get back to the main display:
G1=-20 LVL1=<+5
G2=+15 LVL2= +12
Figure 2.5 gives the menu items and how to make changes.
1200-88 Manual, Rev. A
Page 12
8/18/10
