CROSS-RC EMO XT4, Руководство по сборке

Страница: 2 / 55

EMO XT4 Assembly Remind
1. The spraying and bonding process to body shall be carried out in a ventilated place,and safety masks shall be worn.
2. Please notice to the use of different glues when assembling the vehicle body: the vehicle shell is made of ABS
material,please use ABS special glue; The window and lamp are made of acrylic material. Please use less corrosive
transparent glue or special glue for the model.
3. Please make clean on the bonding surface before bonding the ABS plastic body, and there shall be no paint on the
bonding surface. After applying ABS glue to the two adhesives, apply pressure for 10 seconds to fully bond them.
4. Please conduct simulated assembly to determine the sequence of component before bonding or spraying.
5. For the wiring diagram of electronic equipment, please refer to the description on page X of the manual;
Please conduct power commissioning when the wheels are suspended.
6.
This product is a high-precision model. Please read this manual carefully before assembly and assemble in strict
accordance with this manual.
7. Screw thread sealant shall be used during assembly. Please noted that the screw thread sealant shall not have any
contact with the shell parts. The screw thread sealant and ABS materials will produce chemical reaction, which will
embrittle and crack the shell.
8. It is recommended to use professional tools for installation. Please pay attention to the safety when use tools.
Requirements and recommendations for electronic equipment:
Name
Specifications Remarks
Remotes
controller
4 channels or Up Waterproof connector is recommended
Servo
Shift servo ≥ 3KG x 2
Steering servo ≥ 30KG
High pressure standard Servo in waterproof
For the size of medium Servo, please refer
to the configuration drawing below
ESC
Continuous current ≥ 60A
ESC BEC >3A
Brush motor
Brushless motor
Brush motor 540 27T or Up
2100KV
The Max. Size: Ø 39mm*64mm
Installation hole spacing: 25mm
Motor gear
M=0.6 Z=10T~18T
M=0.6 48P
Battery box size
Motor gear
Total reduction ratio Environment
149*45*37 1
0
T
Low speed 1:50
Suitable for crossing and climbing
High speed 1:25.2
Gear reduction ratio range reference
23 21 19.4 18 16.8 15.8 14.9 14
45.4
41.6 38.4 35.7 33.2 31.2 29.3 27.7
11T 12T 13T 14T 15T 16T 17T 18T
High speed
Low speed
2