electricity and electrical pulses. The receiver is designed to be powered only
from the USB connection on the PC. If the receiver is modified by the user
this voids the CE and FCC certifications and may damage the receiver or
user's PC.
No warranty claims will be accepted if the receiver case has been
opened.
The receiver has been designed to isolate the antenna from the computer.
Connection to the antenna should be made only via the BNC connector.
External antenna earths or grounds should only be connected to the shield of
the BNC connector.
The receiver case is connected to the computer ground and should be
isolated from any external antenna connection.
As well as protecting the computer this also reduces common mode RF noise
from the computer or mains earth from reaching the antenna.
4 Where are the set up files?
On the CD disc included with the SDR4+ is a folder “CCW SDR4 general
coverage SDR”. If you can't use the CD the following link to the CloudMe
folder on the internet contains these files:
https://my.cloudme.com/#g4hyg/Cross_Country_Wireless_CD
Download the files you need individually, trying to download entire folders
doesn’t always work.
5 Before installing the software and driver
Before starting driver installation remove any external USB hubs from the
computer and connect the USB cables from the SDR4+ receiver directly to
the computer USB ports when directed during driver installation. Failure to do
this may result in the driver installation being rejected.
