4
Driver installation
Before starting remove any
external USB hubs from the
computer and connect the USB
cables from the SDR-4+ receiver
directly to the computer USB ports
when directed during driver
installation. Failure to do this may
result in the driver installation being
rejected.
Install all SDR programs and
drivers in Administrator mode.
Failure to do so may result in
incorrect installation of the
frequency control drivers.
Load the SDR-4+ setup program
from the CD disk included with the
receiver or download the latest file
from the Cross Country Wireless
web page.
Open the file.
Allow the program to install.
Click next to start installing the
program. This program installs the
driver files in a folder (usually
) and inserts a ExtIO
synthesiser control file in the
HDSDR and Winrad program files.
If HDSDR or Winrad are not
installed yet the setup program
opens a HDSDR and Winrad folder
in the Program Files folder so that
it's already there when you install
HDSDR and Winrad in the future.
