Crosley Rochester CR66, Инструкция по эксплуатации

Страница: 11 / 13

10
Repeat Playback
Programmed Playback
1
To repeat a single track, choose the track that
you want to repeat, then press the PLAY BUTTON(16)
to start the track. Press the REPEAT BUTTON(10)
once to repeat this track.The REPEAT INDICATOR(9)
will flash.
2
To repeat all tracks, press the PLAY BUTTON (16)
to start the CD. Press the REPEAT BUTTON (10)
twice to repeat all tracks. Once the CD ends, it
will start over again from the beginning of the
CD. The REPEAT INDICATOR (9) will remain
on.
3
To erase the repeat function, press the REPEAT
BUTTON(10) again until the REPEAT INDICATOR(9)
is off.
1
Press the PROGRAM BUTTON (8). " 01" will
shown on the display and the PROGRAM
INDICATOR (7) will flash.
2
Press the FORWARD SKIP BUTTON (13) or
the BACKWARD SKIP BUTTON (11) to select
a track.
3
Press the PROGRAM BUTTON (8) again to
store the selected track number.
4
Repeat steps 2 and 3 above to program other
tracks.
5
Press the PLAY BUTTON (16) to start
Programmed playback. The PROGRAM
INDICATOR (7) will be on.
6
To erase the programmed sequence, press the
STOP BUTTON (14) twice or until the
PROGRAM INDICATOR (7) is off. Programmed
tracks will also erase when the CD DOOR (17)
is opened.
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
CD Operation