W W W.ONEFORALL.COM
11
Search Method
--> If your device does not respond to the
KAMELEON 6
after you have tried
all the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained in the
memory of the
KAMELEON 6
.
Example: To search for your TV code:
1.
Switch ON your Television (not on standby).
2.
Press and hold down the MAGIC key
(for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
3.
Press
SEARCH
.
4.
Press and release the
TV
key to select the device type you like
to setup.
5.
Next, press
POWER
.
6. Point
the
KAMELEON 6
at your Television. Now press CH+
over and over, until your Television turns off
(every time
you press the CH+ key the
KAMELEON 6
will send out a POWER
signal from the next code contained in the memory).
You may have to press CH+ many times (up to 150 times)
so please be patient. Remember to keep pointing the
KAMELEON 6
at your Television while pressing this key.
(If you skip past a code, you can go to the previous code(s) by
pressing the CH - key.)
7.
When your Television switches off
,
press the
OK
key to
store the Code
.
The animated IR Indicator will light up twice.
8.
Press
ESC
to
return to the setup screen
, or press
a device
key
if you want to perform the Search Method for another
device.
9.
Press ESC again to return to user mode (all keys are
displayed).
Turn your device (television) back on and try all the remote’s
functions to ensure they are working properly.
If you cannot control your Television properly, please continue
the Search Method, you may be using the wrong Code.
-
During step 5, instead of POWER you can also press any other key displayed.
This will be the function sent for the next key presses of CH+ or CH- in step
6. If for example; during step 5, you press “2” instead of “POWER”, the
KAMELEON 6 will send the “number 2” signal every time you press CH+
during step 6 (make sure your TV is switched to another channel).
-
To search for your other devices, follow the same instructions above, only
press the appropriate device key during step 4.
-
If your Video’s original remote control does not have a POWER key, press
PLAY instead of POWER during step 5.
Setting up the
KAMELEON 6
Содержание KAMELEON
Страница 4: ...4 WWW ONEFORALL COM The Keypad TV VCR ...
Страница 5: ...WWW ONEFORALL COM 5 The Keypad SAT ...
