English
6
Turntable Operation
1. Rotate the
On/Off Volume Knob
to turn on the power.
2. Set the
Speed Switch
accordingly.
3. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Release the tonearm
Hold Down Clip
.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Lift up the tonearm and move it over the record where play is desired to begin.
Gently put down the tonearm and begin the playback.
7. When the record is finished playing, gently lift up the tone arm and move it
back to the tonearm rest.
8. Lock the
Tonearm Clip
to secure the tonearm.
Platter Auto-stop
If the
Auto-stop Sw
i
tch
is set to ON position, the platter will stop spinning
automatically when the record plays to the end. In some rare occasion, if the
turntable stops playing before the end of the record, set the switch to OFF
position the turntable should overcome this issue.
Pitch Control
The turntable speed can be increased or decreased by approximately 10% by
rotating the Pitch Control knob. To increase the speed, turn the Pitch Control
Knob clockwise. To decrease the speed, turn the knob counter-clockwise.
