Accessory: ADAPTER FOR 45 RPM
This adaptor allows you to play 45 RPM records.
Turntable Operation
2 Place the record on the turntable.
USB Operation
Using the included software and cable, the
USB connection allows you to record your
records onto your compuater. Follow these
instructions to use the USB.
AUX IN
1 Set the SPEED CONTROL SWITCH(5) to the
correct speed (33
1
/
3
, 45 or 78rpm).
3 Move the TONE ARM(2) to the desired
starting point on the record. The record will
start playing.
4 Turn the VOLUME KNOB(9) to adjust the
volume to the desired level.
1 Insert the enclosed software CD into your
computer.
2 Follow the instructions on the computer
screen to install the software. If the CD
does not load automatically, browse the CD
and run the executable file called
“CR-USB.exe”.
3 Connect the square end of the USB cable
to the USB JACK(9) on the right side of the
turntable.
4 Connect the other end to a USB port on
your computer.
5 On your computer, open the Recording
Software.
6 For instructions on operating the recording
software, browse the software CD and
open the Manuals folder.
1 Place the 45 RPM ADAPTER(1) over the
spindle.
2 Gently place your 45 RPM record onto the
turntable.
3 Follow the steps under turntable operation to
play your record.
1 Plug one end of the provided 3.5mm stereo
cable into the AUX IN JACK(11).
2 Plug the other end of the stereo cable into the
output jack of your desired external music
device.
3 Check the volume level of your external
device.
4 Refer to the user manual for correct
operations of the external device to play
music.
