Using your Bluetooth
This Model includes a battery back-up circuit. The
battery will maintain the clock and alarm settings in
the event of a power failure. The battery back-up
requires one 9V battery (not included). The battery
compartment is located on the back of the radio. To
install/replace the battery, follow the instructions below.
1
Press in on the locking tab to remove the BATTERY
COVER (25).
2
Attach a 9V battery to the battery contacts as
shown.
3
Tuck the battery back into the battery compartment
and replace the battery cover.
If the power is interrupted, the clock and alarm times
will remain stored but the display will be blank to
conserve power. The display will come back on and
show the correct time once power has been restored.
Note: In the event of a power failure, the alarm will
default to buzzer mode until power is restored.
The life of the battery will depend on how often you
lose power and the length of power outages. It is
recommended to replace the battery every 9-12
months.
About This Manual
Thank you for purchasing the Crosley Corsair
(CR612D). Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
Instructions in this manual describe the control
functions of the CR612D.
Welcome
Table of Contents
10
Clock & Alarm Operation
Battery Compartment
(For Clock Backup)
Battery Back-Up
Getting Started
Control Locators....................... 4 - 5
Unpacking ................................ 6
Set up ....................................... 6
Radio
AM/FM Tuning ........................ 6
CD Player
Player a CD ............................ 7
Programmed Play .................. 7
Clock & Alarm Operation
Setting the Clock ..................... 8
Setting the Alarm ..................... 8
Snooze ..................................... 9
Sleep function ......................... 9
Battery Back-Up ...................... 10
Using your Bluetooth.............. 10
General
Headphone Jack ..................... 11
Care and Maintenance ............ 11
Troubleshooting Guide ............. 11
Warranty ................................... 12
Bluetooth enables a wireless connection between
a device (such as a smart phone) and the unit,
enabling the user to play and control tracks direct
from their Bluetooth enabled device.
The user must ensure that they have a compatible
Bluetooth enabled device (with media playing
capabilities) such as an Android
®
Smartphone or
Apple iPhone
®
with Bluetooth capability.
The user
must also ensure
that they have loaded compatible
audio files on to the device in order to play through
the unit. Once these have both been confirmed,
the user can connect their device to the unit.
1
Press
POWER
button to on the unit.
2
Turn the FUNCTION SWITCH (8) to the
(Bluetooth) mode.
3
The LED Display indicator will flash indicating
that it is searching for a nearby Bluetooth
enabled device to connect too.
4
On your Bluetooth enabled device, search for
nearby devices. When your device finds
CR612D
connect to this device. There should
be no requirement for a PIN.
5
When the unit has connected to your
Bluetooth enabled device successfully, your
device will indicate that they are connected
and the indicator light on the Bluetooth.
the unit will stop flashing and continuously
illuminate.
