English
6
Setting the Alarm
The alarm function allows you to set two alarms to ring at different times.
1. Press Alarm 1 or Alarm 2 button. The clock display will switch to alarm time
and start to flash. The corresponding Alarm LED will come on.
2. Press the Time button and use the Forward or Backward Skip buttons to set
the hour.
Note: The PM LED will come on to denote PM hour in 12 hour mode.
3. Press the Time button and use the Forward or Backward Skip buttons to set
the minutes.
4. Press the Time button and set the alarm mode (Buzz, CD, or Radio). Use the
Forward or Backward Skip buttons to select the mode.
5. Press the Time button and the alarm will be set.
6. Once set, the alarm will go off once the clock reaches the set alarm time. The
set Alarm’s LED will begin to flash.
7. To stop the alarm while it is going off, press the Alarm button.
8. To turn off the alarm function, press the corresponding Alarm button again,
and the Alarm LED light will go off.
Snooze the alarm
1. When the Alarm is going off, press the SNOOZE button.
2. After 9 minutes, the alarm will go off again.
3. To stop the alarm while it is going off, press the Alarm button.
Radio Operation
1. Press the Power Button to turn the unit on.
2. Press the Mode Button to the Radio mode (rA)
3. Press the AM/FM Button to the desired tuning band.
4. Rotate the Tuning Knob for desired radio station.
The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
Set the Sleep Timer
1. Press the Sleep button on the unit repeatedly to select your desired number
of minutes. The number of minutes shown will display in this sequence:
90
60
30
15
OFF
2. Stop pressing the Sleep button when your desired number of minutes is
displayed. The sleep timer is now set.
