English
6
Turntable Operation
1. Rotate the
Power / Volume Knob
to turn on the power.
2. Set the
Function Switch
to PHONO position.
3. Set the
Speed Switch
accordingly.
4. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
5. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
6. Release the tonearm
Hold Down Clip
.
Note: when the turntable is not in use, remember to lock back hold down clip.
7. Use the
Cue Lever
to lift up the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set
the
Cue Lever
back to the down position, the tonearm will descend slowly
onto the record and begin to playback.
9. When the record is finished playing, use the
Cue Lever
again to raise the
tonearm and then return it to the
Tonearm Rest
. Release the lever to let the
tonearm sit back at its rest. To suspend the playback, repeat the same steps.
10. Lock the
Tonearm Clip
to secure the tonearm.
Pitch Control
The turntable speed can be increased or decreased by approximately 10% by
rotating the Pitch Control Knob. To increase the speed, turn the Pitch Control
Knob clockwise. To decrease the speed, turn the knob counter-clockwise.
