Repeat
Repeat all
Normal
Programmed Play
1
2
3
4
5
6
7
8
9
10 12
11 13
14
16
15
17
18
1
Turn the unit on by turning the ON/OFF KNOB
(2) located on the front panel to the ON position.
2
Press the CD/Radio MODE BUTTON (16) to the
CD position.
3
Press the OPEN/CLOSE BUTTON (15) to
open the CD DRAWER(10).
4
Load the desired CD into the player with the
labeled side of the CD facing up and close the
CD DRAWER(10).
5
The LED DISPLAY (18) will flash ( - - ) for a
second and then display the total number of
tracks on the CD.
Note: The display will read no if there is no
disc in the unit or the disc cannot be read.
6
Press the PLAY/PAUSE BUTTON (6) to begin
playing the CD.
7
To skip to a different track, press the FORWARD
SKIP BUTTON (14) or BACKWARD SKIP
BUTTON (13) until you reach the desired
track number. Pressing the FORWARD SKIP
BUTTON (14) will advance forward from track
to track. Pressing the BACKWARD SKIP
BUTTON (13) will skip backwards from track to
track.
8
To fast forward through part of a particular track,
press and hold the FORWARD SKIP BUTTON
(14). Playback will resume at the point that
you release the button. To reverse playback,
press and hold the BACKWARD SKIP BUTTON
(13).
9
To pause during playback, press the
PLAY/PAUSE BUTTON (6). To resume play,
press the button again.
10
To Stop playback, press the STOP BUTTON (7).
3
In Normal mode, the CD will play from track 1 or
the first selected track till the end of the CD and
stop.
4
When in Repeat 1, the repeat light will flash and
only the selected song will be repeated. You can
select the song to repeat before you press play
or during playback.
5
When in Repeat all, the repeat light will stay on
continuously. In this mode, once the CD is
finished, it will start over from the beginning.
6
Pushing STOP BUTTON(7) will clear the Random
and Repeat functions and the unit will return to
Normal Mode.
You can program up to 20 tracks that will play in the
order that you program them.
1
In CD Mode with a CD inserted and play stopped,
press the PROGRAM BUTTON (11).
2
Select a track you would like to program in
memory by using the Forward or Backward skip
buttons.
3
Once you have selected a track, press the
PROGRAM BUTTON (11) again. That track is
now stored.
4
Repeat steps 2-3 to store up to 20 tracks.
5
When all desired tracks are programmed, press
the PLAY/PAUSE BUTTON (6) to begin playback
of the selected tracks. The tracks will play in the
order in which they were programmed.
6
To clear programming, press the stop button.
Programmed tracks will also be cleared if the
CD Drawer is opened or the power is
disconnected.
1
There are three modes in which you can listen
to your CD :
Normal, Repeat 1, Repeat all.
2
To change between these options, press the
REPEAT BUTTON (16). The play mode will
change in the following sequence.
7
CD Player
Playing a CD
Control Locators
4
Unit Controls
1
Tuner Dial
2
Volume On/Off Knob
3
Play/Pause Indicator
4
AM/FM Button
5
Headphone Jack
6
Play/Pause Button
7
Stop Button
8
Repeat Indicator
9
Repeat Button
10 CD Drawer
11
Program Button
12
Program Indicator
13
Backward Skip Button
14
Forward Skip Button
15
Open/Close Button
16
CD/RADIO Mode Button
17
Tuning Knob
18
LED Display
Play Mode
PROGRAM
PHONES
VOLUME
AM
FM
ON/OFF
PAUSE
PLAY /
STOP
MAX.
REPEAT
TUNING
CLOSE
OPEN/
B.SKIP
F.SKIP
CD/RADIO
PROGRAM
PHONES
VOLUME
AM
FM
ON/OFF
PAUSE
PLAY /
STOP
MAX.
REPEAT
TUNING
CLOSE
OPEN/
B.SKIP
F.SKIP
CD/RADIO