English
5
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect AC adaptor to the
Power Jack
of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speaker. To do this, rotate the
Function Knob
to Aux In mode, connect the
3.5mm auxiliary cable between your audio device and the
Aux In Jack
of this
unit and start playing.
Note: The aux in connection will automatically override the Bluetooth function. To resume
using the Bluetooth function, unplug the auxiliary cable from the aux in jack.
Radio Operation
1. Rotate the
Function Knob
to FM or AM position.
2. Rotate the
Tuning Knob
for desired radio station.
Note:
•
The unit is equipped with a FM antenna. To FM improve reception, move the
antenna around until the reception is clear without interferences.
•
The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
Bluetooth Operation
1. Set the Function Knob to the Bluetooth position, you will hear an activation
sound from the unit.
2. Turn on the Bluetooth feature of
your audio device, search for “CROSLEY
CR3003B
” and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
Note:
•
Bluetooth version
– 5.0
