background image

6

Starting Your Washer

1. Measure detergent and pour it into the washer. If desired, add 

powdered or liquid color safe bleach. Add extra detergent for 
the Super Wash cycle (on some models).

Drop a sorted load of clothes loosely into your washer. 

Load evenly to maintain washer balance. Mix large and 
small items.

Items should move easily through the wash water. 
Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some 
synthetic knits, use a higher water level to provide more 
space (see step 4).

2. (OPTIONAL) Pour measured liquid chlorine bleach into the 

liquid chlorine bleach dispenser (on some models). Bleach 
will be dispensed automatically during the wash part of the 
cycle.

Never use more than 1 cup (250 mL) for a full load. Use 
less with a smaller load size.

Follow the manufacturer’s directions for safe use.

To avoid spilling, use a cup with a pouring spout. Do not 
let bleach splash, drip, or run down into the washer 
basket.

Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see "Adding 
Liquid Chlorine Bleach."

3. Close the washer lid.

4. Turn the WATER LEVEL selector to the correct setting for your 

wash load and the type of fabric being washed.

Choose a water level that allows the load to move freely 
for best fabric care. See "Loading".

You may change the water level after the washer has 
started filling by turning the selector to a different setting.

5. Set the TEMPERATURE selector (on some models) to the 

correct setting for the type of fabric and soils being washed. 
Use the warmest water safe for fabric. Follow garment label 
instructions.

NOTE: On models with temperature selections in the Cycle 
Control knob, see "Cycle Time and Temperature Options" in 
the "Selecting A Cycle and Time" section.

NOTE: In wash water temperatures colder than 70ºF 
(21ºC), detergents do not dissolve well. Soils can be difficult 
to remove. Some fabrics can retain wear wrinkles and have 
increased pilling (the formation of small lint-like balls on the 
surface of garments).

Fire Hazard

Never place items in the washer that are 
dampened with gasoline or other flammable 
fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of 
oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in
death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

Water Temp

Use For

Hot
111°F (44°C)
or above

Whites and pastels

Heavy and greasy soils

Warm
90°-110°F
(32°-43°C)

Bright colors

Moderate to light soils

Cold
70°-90°F 
(21°-32°C)

Colors that bleed or fade

Light soils

Содержание Conservator 3953964













Отзывы: