7
iv) Open the rear cabinet door. (location shown in Fig 1 on page 5)
v) Locate the 4 wing nuts underneath the CD mechanism. (see below fig. 3) Unscrew
the wing nuts until they spin freely, (this helps the mechanism ‘float’, for optimum
performance).
vi) Plug the jukebox in and switch the mains power switch on. (location of mains power
switch is shown in Fig 1 on page 5) The front display will show “TRANSIT”.
vii) Locate the “transit” switch in the rear of the Jukebox. (see fig.3) Switch to “operate”
mode, the CD lifting mechanism will traverse to the left, and then return to its central
position
viii) Close and lock both cabinet doors.
The jukebox is now ready to play.
VIEW OF LOCATION OF MECHANISM RETAINING SCREWS AND
TRANSIT SWITCH IN THE REAR OF THE JUKEBOX.
Wing nuts x 4. loosen
to allow mechanism
“floating”
Blutooth device
(once installed)
Transit switch
FIG 3
