13
Aligning the refrigerator doors
Caution
※
Risk of electric shock! Before removing top hinge cover
1. Shut off the water supply to the appliance.
2. Unplug the appliance or switch off the fuse.
If the refrigerator doors are not properly aligned.
Unscrew the top hinge cover and raise the panel
Do not disconnect any harness wire.
Loosen the fastener counterclockwise, move the hinge
sideway to adjust the refrigerator door.
Do not remove the fastener!
Tighten the fastener and replace the top hinge cover.
Adjusting the freezer drawer
If the freezer drawer is higher on one side than the other
(not even):
1. Loosen the four side screws on the side where
adjustment is needed.
2. Move the Stopper from ‘left picture position’ to ‘right
picture position’.
3. Adjust the leveling by rotating the Position Knob.
(Pull and rotate the Position Knob)
4. After adjusting the leveling, tighten the four side screws.
Front Cover
After installation and/or door leveling, fasten front
cover with screws. (Remove the screws on the
front bottom panel first. Click and screw the cover.)
Caution
●
The front of refrigerator needs to be just a little
higher than the back for easy door closing, but if
the wheel is raised too much for door balance,
i.e. the front of refrigerator is much higher than
the back, it can be difficult to open the door.
Installing the handles
- After installation and/or door leveling, install the handles.
- All the handles are identical.
Insert refrigerator door handles into guide.
Fix the handle with screw (supplied).
Insert freezer door handle into guide.
Fix the handle with screw (suppled).
1
2
3
1
2
15
1
3
2
1
2
3
Содержание CFDD265TS
Страница 1: ...Code F74MCL 01 V1 CFDD265TS ...
Страница 20: ......