3
PRODUCT REGISTRATION
Thank you for choosing
Crosley
This Use & Care Guide is part of our
commitment to customer satisfaction and
product quality throughout the service life of
your new appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.
_________________________________
Purchase Date
_________________________________
Model Number
_________________________________
Serial Number
Very Important Information - Read
Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most
dishwashers -
IT’S QUIETER
.
Your dishwasher with it’s Precision Direct
Wash System has many enhancements to
reduce it’s sound level. Still, it is normal to
hear some of what is going on inside. The
wash cycles include several instances of
water entering the unit (splashing), the wash
pump running to spray water on the dishware
(motor & splashing) and the drain pump
running to discharge the dirty water and soils.
Variations in the pumping/spraying sounds are
normal. During a cycle the pump switches on
and off many times, and operation switches
back and forth between wash arms to provide
the best cleaning performance.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON’T
hear.
NOTE
ë
Why Energy Effi cient Units run long cycles:
Several factors are important to washing
dishware. The energy use of the dishwasher
was reduced by applying more of the factors that
don’t use so much energy and less of the ones
that use more. As a result, you will see that the
wash cycles take longer.
NOTE
Not all cycles and options available on all
models.
ë
NOTE
The dishwasher is programmed to remember
your last cycle so you do not have to reset
each time. To start the dishwasher using
the same cycle and options selected on the
previous wash, just press the START/CANCEL
pad.
ë
ë
NOTE
ë
NOTE
If the dishwasher door is opened while the
unit is running, the START/CANCEL pad must
be pressed and the door shut immediately
to return the unit to the selected cycle and
option, this must happen within 10 minutes
for the unit to continue the cycle.
ë
Getting Started
1. Load Dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Select desired CYCLE (See Cycle Chart).
The indicator light above the pad will glow
when selected.
5. Select desired OPTION (See Energy
Options).
The indicator light above the pad
will glow when selected.
6. Run hot water faucet nearest dishwasher
until water is at or near 120
0
for optimal
performance (See Water Temperature). Turn
water off.
7. To start, press START/CANCEL pad.
8. Close door to latch.