English
11
Cartridge Replacement
1. Before replacement, put the stylus protector back on the stylus to prevent
damage to the stylus during the replacement process.
2. Turn the headshell locking ring clockwise to release the headshell and
remove it from the tonearm.
3. Carefully remove the wire leads from the original cartridge
4. Loosen the two screws on the headshell that are securing the cartridge and
then remove the original cartridge.
5. Mount the new cartridge to the headshell and tighten it lightly. Do not
completely tighten the screws at this moment.
6.
Connect the wire leads to the new cartridge’s terminals .The wire lead color
codes are as below:
White
Left channel positive
(L+)
Blue
Left channel negative
(L
–)
Red
Right channel positive
(R+)
Green
Right channel negative
(R-)
7. Install the headshell back to the tone arm and lock the headshell ring.
8.
Adjust the cartridge’s position to make sure it is precisely aligned on the
headshell so that the stylus will be tracking parallel to the grooves. Tighten
the screws completely once the perfect alignment is achieved.
Note: For best result, use a cartridge alignment protractor to aid the alignment process.
Turntable Maintenance
1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the
turntable mat or a record’s edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean the records to get rid of dust or grease with a record cleaning brush
and record cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber
cloth.
Note: Do not use cleanser other that contains alcohol, benzene or any other harsh
chemicals, which might damage the paint and finish of the turntable.
** Crosley offers a product line of different cleaning accessories. Please
ask your retailer or check out our website www.crosleyradio.com for
more cleaning product information.
