CropX Deep, Руководство по установке, Страница: 8 / 13

This document and the information thereon are the property of CropX, and
may only be used for the purpose for which this document was supplied.
Uninstalling the Sensor
It is recommended to uninstall the sensors at the end of each
season, by completing the following:
Bring the handle, the sensor head adapter, a 1/2 gallon of
water and a shovel.
Using the app, click on the sensor you wish to uninstall and
a path between you and the sensor will be displayed. Go to
the sensor.
Ensure the soil is moist. It is recommended to wet the soil
around the sensor both a day prior to uninstalling, and just
before the uninstallation.
Connect the sensor head adapter to the handle.
Mount the sensor head adapter to the grooves on the top
of the sensor head.
Mount the handle on the sensor head adapter socket tool
and loosen it counterclockwise.
If you feel strong resistance from the sensor while trying to
screw it out, pour water around the sensor area to soften
the soil. You may use the shovel to dig around the sensor
to further loosen the soil but make sure to keep a distance
of at least a foot away from the sensor.
After removing the sensor, keep the sensor in a safe and
dry place and charge it prior to the next installation.
**Note: In addition to the physical uninstallation of the
sensor, it should also be deactivated from the App.