Croplands SITREX FSP 100, Инструкция по эксплуатации

Страница: 22 / 42

2
The manufacturer warrants new machinery to be free from defects in material and
workmanship at the time of delivery to the original purchaser if correctly set up and operated
according to this Operator's Handbook.
The manufacturer undertakes to repair or replace free of charge any defective part which
should be returned by the purchaser (freight prepaid) and found to be defective on inspection
authorised by the manufacturer during the warranty period.
This warranty shall be valid for 12 (twelve) months from the delivery of the goods to the
original purchaser.
If the customer is unable to return the defective part to the manufacturer, the manufacturer
cannot be held responsible for any cost due for repair or replacement of any part of the machine.
He shall only supply the part(s) required for such repair and/or replacement.
The warranty shall be considered null and void when it is evident that the machine has been
improperly used or at least repaired without authorisation.
The manufacturer shall not be held responsible for any obligation or agreement reached by
any manufacturer employers, agents or dealers who do not comply with the above warranty. The
manufacturer cannot be held responsible for the subsequent damages. This warranty replaces
any other warranty, either explicit or implied, as well as any other obligation of the manufacturer.
The machine is identified by means of the following technical data:
•
Type of machine
•
Registration number
Stamped on the rating plate fastened to the frame of the machine. This data should be mentioned
when requesting any replacements or information.
NOTE:
ALL WARRANTY WORK OR REPAIRS MUST BE APPROVED BY THE MANUFACTURER BEFORE
WORK BEGIN.
ANY WORK OR REPAIRS MADE BEFORE APPROVAL MAY NOT BE COVERED UNDER WARRANTY.
PLEASE NOTIFY YOUR SALES & SERVICE DEPARTMENT OF THIS POLICY.