Crommelins CPT24S, Руководство по эксплуатации и инструкция

Страница: 3 / 16

3
This manual contains important information on how to use the following power trowels
models CPT24S, CPT34R, CPT34RD, CPT40R, CPT40RD and CPT46S properly and safely.
Please read through this manual before you attempt to operate this product.
SAFETY PRECAUTIONS
Before operating this piece of equipment, the operator should read this manual.
Whenever possible, he/she should be shown how to operate the unit by an experienced
operator. It is dangerous for an inexperienced person to operate any machine. Trial and
error is not the safe way to become familiar with a piece of equipment.
To prevent injury wear the following protective clothing: Gloves, hard hat, work boots, ear
plugs, safety goggles and any other protective devices required by job conditions.
• Stay AWAY from blades during operation.
• Be cautious with the ventilation of work place. Avoid operating machine in closed
area, since engine exhaust contains poisonous gases.
• Be careful with hot components. Mufflers and other parts of the engine are hot during
operation and right after shutdown.
• Fasten fuel cap tightly and close fuel strainer cock during transportation.
BELT SETTING
STEP 1 – Loosen engine base bolt (underneath engine) to allow engine-base movement.
STEP 2 – Insert V-belt into clutch pulley and reducer pulley one at a time.
STEP 3 – Adjust the engine position by moving engine-base to ensure v-belts are tight
enough.
IMPORTANT: Normal slack should be approximately 10-15mm (1/2”) when the belts are
forcibly depressed in the middle position between rotor pulley and clutch pulley.
Tighten all engine bolts and cover V-belt and pulley with belt cover, tighten cover bolts.