Crommelins CC60R, Руководство по эксплуатации и инструкция

Страница: 7 / 15

7
MAINTENANCE
CAUTION!
FLAMMABLE LIQUID. When performing maintenance, stop engine and do not smoke in
adjacent area.
HIGH TEMPERATURE. Allow machine and engine to cool down before performing
maintenance. Contact with hot components can cause serious injury.
MOVING PARTS. Make sure engine is shutdown before maintenance. Contact with moving
parts can cause serious injury.
Daily Service
• Check air cleaner element and clean as necessary.
• Check engine oil levels.
• Check for any loose fasteners.
• Check belt tension.
Weekly Service (every 50 hours of operation)
• Refer to engine service manual.
BELT SETTING
STEP 1 – Loosen engine base bolt (underneath engine) to allow engine-base movement.
STEP 2 – Insert V-belt into clutch pulley and reducer pulley one at a time.
STEP 3 – Adjust the engine position by moving engine-base to ensure v-belts are tight
enough.
IMPORTANT: Normal slack should be approximately 10-15m m (1/2”) when the belts are
forcibly depressed in the middle position between rotor pulley and clutch pulley.
Tighten all engine bolts and cover V-belt and pulley with belt cover, tighten cover bolts.
STORAGE
• Ensure fuel tank tap is turned off.
• Make sure that the engine is completely cooled off before storage.
• Clean up oil and dust accumulation on rubber parts.
• Clean the base plate and wipe on a light coat of oil to prevent rust formation.
• Cover the machine and store it in a dry place.
For Long-term Storage
Remove fuel from the fuel tank. Also remove fuel remaining in the fuel line and
chamber of the carburettor. To drain fuel from the chamber of the carburettor, remove
the drain plug provided at the chamber and remove fuel.