22
21
Bobber Valve
Gently press the valve up and down 2-3 times
and ensure it is clear from debris before you
begin using the Cooker.
Lid Lock Pin
Gently press the pin and ensure it is clear
from debris before you begin using the
Cooker.
Care & Cleaning
Note:
Condensation may collect inside the
Heating Base under the removable Cooking
Pot. This is normal. Allow to cool, and then
dry using kitchen cloth.
Note:
Always make sure that each
component (pot, valves, gasket, etc.) is
completely dry before you put back into the
Cooker.
If food sticks or burns to the surface of the
Cooking Pot, then fill it with hot soapy water
and let it soak before cleaning. Use a rubber
or nylon spatula to remove stubborn residue.
If scouring is necessary, use a non-abrasive
cleaner and a nylon scouring pad or brush.
Hand wash the Cooking Pot with mild
detergent in warm water to protect the inner
coating.
If white spots form on surface of Cooking Pot,
then soak it in a solution of vinegar or lemon
juice and warm water for 30 minutes. Rinse
and dry.
Exterior
Wipe the exterior of the Heating Base with a
damp cloth and polish dry. DO NOT use harsh
abrasives, scourers or chemicals, as these
will damage the surfaces. To prevent damage
to the Cooker do not use alkaline cleaning
agents when cleaning. Only use a soft cloth
and mild detergent. Never immerse the
heating base in water or any other liquid.
Condensation Collector
Empty any collected water from the
Condensation Collector after each use. Wash
in warm, soapy water.
Lid and Sealing Gasket
Always examine the gasket before each use.
The silicon Sealing Gasket on the inside of
your Cooker Lid may deteriorate over time.
Remove Sealing Gasket for cleaning as
needed. Hand clean using warm, soapy water,
dry thoroughly, and replace Sealing Gasket
in Lid before use. Leave the Lid upturned
for storage, as this will also extend the life
of the gasket. Sealing Gasket may need to
be replaced every 1 – 2 years depending on
regular use.
Steam Release Valve
Ensure the Steam Release Valve is clear from
debris before you begin using the Cooker.
Remove the valve and gently clean. Ensure it
is completely dry before replacing.
Steam Release Valve Cover
The Steam Release Valve Cover is on the
underside of the Lid. Ensure it is clear from
debris before you begin using the Pressure
Cooker. To clean, carefully pull the cover off
and clean using warm, soapy water. Press
the cover back into its place after cleaning is
complete.
Care & Cleaning
Note:
Never use metal utensils or cleaning
devices on the Cooking Pot, as this may
result in scratching and damaging the
non-stick coating.
Figure 7
Underside of Lid
Bobber Valve
Steam Release
Valve Cover
Pressure Safety Device
(Do not unscrew)
Note:
Cooking Pot is dishwasher safe
however the outer aluminium finish may
discolour over time. This will not affect
cooking performance.
