Visit us at
crlaurence.com
for international toll free information 3
A
C.R. LAURENCE Co., INC.
3.
Guard against electric shock.
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4.
Keep children away.
Do not let visitors touch the tool or cord.
All visitors should be kept away from work area.
5.
Store idle tools.
When not in use, tools should be stored in a dry, high or locked up place,
out of the reach of children.
6.
Do not force tool.
It will do the job better and safer at the rate for which it was intended.
7.
Use the right tool.
Do not force small tools or attachments to do the job of a heavy duty tool.
Do not use tools for purposed not intended.
8.
Dress properly.
Do not wear loose clothing or jewelry that can be caught in moving parts.
Rubber gloves and nonskid footwear are recommended when working outdoors. Wear protective
hair covering to contain long hair.
9.
Use safety glasses.
Use of a face or dusk mask is recommended.
10.
Connect dust extraction equipment.
If devices are provided for the connection of
dust extraction and collection facilities ensure these are connected and properly used.
11.
Do not abuse the cord.
Never carry the tool by the cord or yank it to disconnect it from
the socket. Keep the cord away from the heat, oil and sharp edges.
12.
Secure work.
Use clamps or a vise to hold the work. It is safer than using your hand and
it frees both hands to operate the tool.
13.
Do not overreach.
Keep proper footing and balance at all times.
14.
Maintain tool with care.
Keep tool clean for better and safer performance. Follow instruction
for lubrication and changing accessories. Inspect tool cord periodically and if damaged have it
repaired by an authorized service facility. Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean and free from oil and grease.
15.
Disconnect tools.
When not in use, before servicing, and when changing accessories
such as blades, bits, and belts.
16.
Remove adjusting keys and wrenches.
Form a habit of checking to see that keys and
adjusting wrenches are removed from the tool before turning it on.
17.
Avoid unintentional starting.
Do not carry a plugged-in tool with a finger on the switch.
Ensure switch is off when plugging in.
18.
Use outdoor extension cords.
When tool used outdoors, use only extension cords
intended for outdoor use.
19.
Stay alert.
Watch what you are doing. Use common sense. Do not operate tool when
you are tired.
20.
Check damaged parts.
Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated in this instruction manual. Have defective
switch replaced by an authorized service facility. Do not use the tool if the switch does not turn it
on and off.
