Cristofoli SuperGap Evolution 2, Руководство пользователя

Страница: 13 / 16

13
Cristófoli Vacuum Pumps are individually monitored according to internal test and
manufacturing patterns approved by Cristófoli’s quality control.
QUALITY CONTROL
If there’s any problem with your equipment, at first, see the topic “ Troubleshooting ” (Page.
12), if the problem persists, contact your local dealer for an evaluation and possible repair of
your equipment. It will be also necessary to have the original invoice from your dealer to
confirm the date of purchase.
Before contact, have in hands the model of your autoclave, voltage, serial number, and
the date of manufacture, found in the identification label located in the back of the
equipment (Fig. 6, page. 8) and a description of the problem.
Always contact your local dealer . If you have problems contacting your dealer, contact
us through our website: www.cristofoli.com.
HOW TO PROCEED WHEN SERVICE IS NEEDED
THE VACUUM PUMP STOPS AND DOES NOT SWITCH ON
•The motor is overheated and the thermal fuse was
activated -------------------------------------------------------- •Wait until the motor gets cold, if it doesn’t get back
to work, see “ How To Proceed When Service Is
Needed ” (Page 13).
•Verify voltage and electrical wire conditions;
POSIBLE CAUSES
SOLUTION
If the problem persists after the verification of all items, contact your local dealer.
C R I S T Ó F O L I
V A C U U M P U M P S
I N S T R U C T I O N M A N U A L