PREVENTIVE MAINTENANCE
In order to avoid the risk of injuries such as accidental burns, unplug the equipment and wait for the sealing bar to cool down before
performing any maintenance procedure.
Cleaning -
For an efficient cleaning, which must be done on a daily basis, use on the external side of the equipment a humid cloth with
biodegradable neutral detergent, after it, clean with a cloth dampened with alcohol 70% or peracetic acid at 1%. Periodically search for
paper stuck in the blade’s guide slot.
Replacement of blades -
BE CAREFUL WHEN HANDLING THE BLADES!
Place the blade holder at the center position, push the
guide (Fig. 5) and take the blade holder out (Fig. 6). Support the holder on the guide (Fig. 7) and take out the screws. Take out the old
blades (Fig. 8), place the new ones (n° 23) and repeat the process inversely. To put back the blade holder, place it at the center position,
verify if the tip of the blades is centered to the guide slot and press it down.
Manufactured by:
CRISTÓFOLI EQUIPAMENTOS DE BIOSSEGURANÇA LTDA.
C.N.P.J.: 01.177.248/0001-95 - Rodovia BR-158, nº127, CEP 87303-327
Campo Mourão - Paraná - Brasil.
Website: www.cristofoli.com - e-mail: [email protected]
ANVISA register:
exempt
Responsible Technician:
Eduardo Luiz Soppa - CREA/PR - 109201/D
02
TECHNICAL DATA
WARRANTY TERMS
HOW TO PROCEED WHEN SERVICE IS NEEDED
If there’s any problem with your equipment, get in touch with your local retailer or an authorized Cristófoli representative to schedule an evaluation
or repair of your equipment.
Before making contact, please have in hands the model of your equipment, voltage, serial number and the date of manufacture found on the
identification label located on the bottom of the equipment and a description of the problem.
Gross Weight
Net Weight
Voltage / Hz
Model
National
Dimmensions (cm)
(L x A x P)
(package) 45 x 12,5 x 31
(sealer) 44,2 x 12,5 x 30,5
3,3 kg
2,9 kg
110V - 240V
50/60 Hz
Sealing Area
(width)
30 cm
Sealing
Temperature
Sealing
Thickness
12 mm
175°C to 180°C
Power
80 W
CUSTOMER SERVICE DEPARTMENT - CSD
If you have doubts, complaints or suggestions, contact Cristófoli through the
Customer Service Department - CSD
by the e-mail:
Fig.5
Fig.6
Fig.7
Fig.8
Never perform sealing with the plastic side downwards
to avoid trouble with access of plastic material on the heater.
Cristófoli Equipamentos de Biossegurança
warranties the Cristófoli Sealer for 01 (one) year against any manufacturing defect from the
date of the purchase receipt (provided it contains the serial and lot numbers of the equipment), of which 03 (three) months refer to the legal
warranty (established by section II, art. 26, CDC, Brasil) and nine (09) months to the contractual warranty (arranged in art. 50, CDC, Brasil). Visit
our website www.cristofoli.com and register your product online.
Traveling costs (based on the distance traveled in km) and the stay of the authorized technician for installation, repair or maintenance
before
or after
the warranty period, will be responsibility of the buyer/owner as well as the freight charges for shipping the equipment to the authorized
technical assistance office for repairs or if necessary, to the factory itself.
The warranty will be voided immediately in cases of:
-
Problems arising from natural causes (such as floods, lightning, landslide, etc.).
- Sinister (theft or robbery).
- Damage caused by accidents, such as: drops, power outage, etc..
- Use of materials that are not in accordance to the type of equipment, as described in the instruction manual.
- Removal and/or tempering of the serial number shown in the identification label of the product.
- Signs of tampering and/or blotted out data on the purchase or service receipt of the equipment.
- Signs of external violation of the product or broken factory seal.
- Use of accessories and materials not specified by Cristófoli.
- Modifications of the equipment performed by the customers themselves or at their own request.
- Repairs performed by technicians who are not part of the Cristófoli Authorized Service Network.
- Noncompliance with any measure or caution recommended in the instruction manual of the product.
- Lack of grounding or grounding not in accordance with the current standards of the country.
The Heating element is not covered by warranty if there’s plastic material on the heater.
Cutting blades are not covered by warranty.
