15
LED DIAGNOSTICS
The CS-2016DP-FM system includes disarm diagnostics, through the RED LED light, that will help in
determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the
vehicle was tampered with or if there is a false alarm problem in which case you can make the necessary
adjustments to correct the problem. When the system is disarmed with the remote you will hear the normal 2
chirps, then 4 quick chirps that indicate the alarm was triggered while you were away. Check the LED light for
a sequence of flashes:
Shock Sensor = 1 Flash
Door = 2 Flashes
Hood/Trunk = 3 Flashes
Ignition = 4 Flashes
Diagnostics will reset when the Ignition is turned on or when the system is re-armed.
TRANSCEIVER / REMOTE CONTROL PROGRAMMING
Note: All transmitter codes must be learned at time of programming!! Up to 4 different transmitter
codes can be stored in the memory of the system.
1. Turn key to the ON position.
2. Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
3. Press buttons #1 (Lock) & #2 (Unlock) together at the same time of each transceiver to be learned. You
should get 2 light flashes indication the unit is waiting for a 2
nd
code, then press button #1 & #2 of a second
transmitter or transceiver, the unit will flash 3 times indicating its waiting for the 3
rd
code and lights will flash
4 times for 4
th
code. If all 4 codes are learned, the unit will automatically exit code learning mode,
otherwise turn key off and close hood.
NOTE: When learning 2-Way FM remotes wait for the LCD to confirm with a beep and the antenna
ICON on the LCD screen BEFORE learning the next remote.
SEE DIAGRAM ON NEXT PAGE
