10
Troubleshooting
Symptoms
Solutions
The ON/OFF signal light <E>
is not on after the car is
started?
1. Check the installation-wiring diagram.
2.
Ensure that the parallel red and black line
from the control box is connected properly.
3. Check for 12 volts on the blue wire while the
ignition on.
No video signal appears while
reversing the car?
1. Check the rearview Camera lens.
2. Check the rearview Camera wiring and
connection.
3. Check the cable from the rearview mirror is
connected to the control box.
4. Check out the wire connection (to find out
whether the system’s reverse wire cable is
connected to the reverse switch gear of the
car)
Video image is not sharp
enough?
Clean the lens of the camera.
11
Illustration of Connections
Figure 6
Ignition
