DISCLAIMER
:
Under no circumstances shall the manufacturer or distributor of the PlateCam™ be held liable for
consequential or incidental damages sustained in connection with the use of the PlateCam™ Rear Vision
System. The PlateCam™ is designed as a safety enhancement device and is in no way intended as a
replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when
backing a vehicle. Always check surroundings for safety when backing! Objects on the monitor are
closer than they appear. For the best fit, modification of the vehicle license may or may not be
necessary. It is the sole responsibility of the vehicle owner to check and verify any and all State or
Federal Motor vehicle codes with regards to modifications of vehicle license plates. The manufacturer of
the PlateCam™ assumes no liability or responsibility whatsoever with regards modifications of the
license plate.
OPTIONAL ACCESSORIES:
SV-40AB: An adjustable bracket is available for vehicles that do not have clearance under the trunk lip or the
License plate lighting assembly to install the Plate cam or Bar Cam.
SV-30EXT: 30 FT extension cable for vehicles requiring an extended cable run.
HARDWARE / PART LIST:
PARTS LIST:
2 X Torx Pin 2.5"
Security Bolt
2 X Torx Pin 7/8"
Security Bolt
2 X Phillips
Module Box
Screw
4 X Spacer/
Washer
2 X Nut
T-30 Torx L-KEY
Security Pin
Adjuster Bracket
SV-40AB
Extension Cable
SV-30EXT
2
