5
REMOTE BEEP & VIBRATE SELECTION
The LCD pager remote BEEPS and VIBRATES when it receives a signal from the vehicle. The Beeps and
Vibration are selectable (on/off). To enter program mode,
1. Press VEH Button on the side of the remote control 5 times.
2. The remote will beep and the
AM or PM
display will begin flashing.
3. Press the Panic button to choose the mode of “Beep ON/OFF & Vibrate ON/OFF”.
4. Press the VEH Button to
Save and Exit Setup
or wait 8 seconds, the LCD light will turn off.
Mode 1: The remote beeps once and vibrates: this indicates “Beep ON & Vibrate ON”.
Mode 2: The remote beeps once without vibration; this indicates “Beep ON & Vibrate OFF”.
Mode 3: The remote only vibrates, without beep; this indicates “Beep OFF & Vibrate ON”.
Mode 4: The remote does not vibrate or beep; this indicates “Beep OFF & Vibrate OFF”.
All manuals and user guides at all-guides.com